#Tbs discovery pro receiver install manual#

This new motor is unlike any other HK motor I have seen. Since I recently added a Brushless Gimbal the weight has gone up considerably so I have changed the motors to the HK AX2810Q, 750Kv units. They perform very well once balanced but the Kv was a little higher than I wanted. The original motors were HK NTM28-26 1000Kv units.

With the new SimonK ESC's it works well and it is very smooth. Like on my other quad I chose parts that were consistently used by others with reliable results. These notes then describe how I put together some the components I selected in this frame.

#Tbs discovery pro receiver install manual#

The HT-FPV build got all the set-ups defined and understood and proved to some degree, the compatability and reliability of the chosen components.Īs in the HT-FPV build,I do not describe in these notes the basic frame assembly as the frame maker has a very good, easy to understand manual which covers everything needed. These build notes are brief and only cover some of the things I found important or a good practice. You'll also need a base station and to see mine, go to this link: **Motors are $17.56 plus $12ea for abec3 bearings. SimonK 25A Flashed ESC by Steve (saabguyspg) TBS Discovery Frame Kit with TBS Core installed Additionally the RX and any camera Gimbals are not shown in this list.

The quantities shown are for a single build and do not reflect spares such as extra props or battery packs. What is not shown are additional fasteners tie-wraps, connectors, aluminum materials, etc. The component list includes all the major components needed.

3.1 Motors, ESC's and Power DistributionĪfter my experience with the HT-FPV frame, I stepped it up a bit.Ĭurrent Weight fully loaded with current mods as of Aug 2014 - 61.2oz (1735gr).

1 Team Blacksheep TBS Discovery Build Log.